„RoboMaster S1“ yra žaidimus keičiantis mokomasis robotas, sukurtas kiekvienam besimokančiajam atverti kuo daugiau galimybių. Įkvėptas didžiausių kasmetinių „RoboMaster“ robotų varžybų, „S1“ suteikia vartotojams išsamų mokslo, matematikos, fizikos, programavimo ir kitų dalykų supratimą, žavėdamas žaidimo režimais ir kitomis intelektualiosiomis funkcijomis
„DJI RoboMaster S1“ yra pirmasis „DJI“ robotas, kuris neskraido danguje, o cirkuliuoja per žemę ir kuris siūlo robotikos naujoves per edukacinį komponentą.
Robotas sugeba atpažinti garsus ir reaguoti į juos, atpažinti objektus ir netgi bendrauti su kitais robotais. Jo funkcijos apima stebėjimą, regos žymeklių atpažinimą, stebėjimo režimą, gestų ir plojimų atpažinimą arba, kaip minėjome, kitų S1 robotų atpažinimą. Jame taip pat bus modernesnės programavimo sistemos, kad ekspertai galėtų sukurti savo funkcijas.
Gamintojo puslapis: www.dji.com/robomaster
|
Camera |
|
|
FOV |
120° |
|
Max Still Photo Resolution |
2560×1440 |
|
Max Video Resolution |
FHD: 1080/30fps |
|
Max Video Bitrate |
16 Mbps |
|
Photo Format |
JPEG |
|
Video Format |
MP4 |
|
Sensor |
CMOS 1/4″; Effective pixels: 5 MP |
|
Operating Temperature Range
|
-10 to 40 °C (14 to 104 °F) |
|
Narrow Infrared Units |
|
|
Effective Range [1] |
6 m (in indoor lighting conditions) |
|
Effective Area
|
Varies from 10° to 40° |
|
Wide Infrared Units |
|
|
Effective Range [1] |
3 m (in indoor lighting conditions) |
|
Effective Width |
360° (in indoor lighting conditions) |
|
Hit Detector |
|
|
Detection Requirements |
For the Hit Detector to be activated, the following conditions must be met: Gel bead diameter ≥ 6mm, launching speed ≥20m/s, and the angle between the hit direction and hit detector plane is no less than 45°. |
|
Maximum Detection Frequency |
15 Hz |
|
S1
|
|
|
Weight |
Approx. 3.3 kg |
|
Dimensions |
320×240×270 mm (length × width × height) |
|
Chassis Speed Range
|
0-3.5 m/s (forward) |
|
Max Chassis Rotational Speed |
600°/s |
|
M3508I Brushless Motor |
|
|
Max Rotational Speed |
1000 rpm |
|
Max Torque |
0.25Nm |
|
Max Output Power |
19 W |
|
Operating Temperature Range Driver |
-10 to 40 °C (14 to 104 °F) FOC |
|
Control Method |
Closed-loop speed control |
|
Protection |
Overvoltage protection |
|
Blaster |
|
|
Controllable Launching Frequency |
1-8/s |
|
Max Launching Frequency |
10/s |
|
Initial Launching Speed |
Approx. 26 m/s |
|
Average Load |
Approx. 430 |
|
Gimbal |
|
|
Controllable Range |
Pitch: -20° to +35° |
|
Mechanical Range |
Pitch: -24° to +41° |
|
Max Rotational Speed |
540°/s |
|
Vibration Control Precision (on the flat surface and with the Blaster idle) |
±0.02° |
|
Intelligent Controller |
|
|
Latency [2] |
Connection via Wi-Fi: 80-100ms |
|
Live View Quality |
720p/30fps |
|
Max Live View Bitrate |
6 Mbps |
|
Operating Frequency [3] |
2.4 GHz, 5.1 GHz, 5.8 GHz
|
|
Operating Mode
|
Connection via Wi-Fi, Connection via Router |
|
Max Transmission Distance[4] |
Connection via Wi-Fi: |
|
Transmission Power (EIRP) |
2.400-2.4835 GHz |
|
Transmission Standard |
IEEE802.11a/b/g/n |
|
Intelligent Battery |
|
|
Capacity |
2400 mAh |
|
Nominal Charging Voltage |
10.8 V |
|
Maximum Charging Voltage |
12.6 V |
|
Battery Type |
LiPo 3S |
|
Energy |
25.92 Wh |
|
Weight |
169 g |
|
Operating Temperature Range |
-10 to 40 °C (14 to 104 °F) |
|
Charging Temperature Range |
5 to 40 °C (41 to 104 °F) |
|
Maximum Charging Power |
29 W |
|
Battery Life in Use |
35 minutes (measured at a constant speed of 2 m/s on a flat surface) |
|
Battery Life on Standby |
Approx. 100 minutes |
|
Charger |
|
|
Input |
100-240 V, 50-60Hz, 1A |
|
Output |
Port: 12.6 V=0.8A or 12.6 V=2.2A |
|
Voltage |
12.6 V |
|
Rated Voltage |
28 W |
|
Gel Bead |
|
|
Diameter |
5.9-6.8 mm [2] |
|
Weight |
0.12-0.17 g [2] |
|
App |
|
|
App |
RoboMaster |
|
iOS |
iOS 10.0.2 or later |
|
Android |
Android 5.0 or later |